American Microwave Corporation
7309-A Grove Road
Frederick, MD 21704


ISO -9001:2015

In Pursuit of Excellence
Through Engineering since 1978


AMC Model AGTN-2000-60DD-100 is a High
Speed, Broad
Band, Variable
Controlled by 8 Bit Positive True Binary Logic.


 Frequency Range

100 MHz – 2.0 GHz Minimum

 Insertion Loss

2.5 dB Maximum

 Attenuation Flatness
± dB Maximum)

  0 – 30 dB ±0.5 dB Maximum
30 – 50 dB ±1.5 dB Maximum
50 – 60 dB ±2.5 dB Maximum

 Attenuation Accuracy

  0 – 10 dB ±2.0 dB Maximum
10 – 20 dB ±1.0 dB Maximum
20 – 50 dB ±1.5 dB Maximum
50 – 60 dB ±2.0 dB Maximum

 Switching Time

<1 usec (500 nsec Typical)


2.0:1 Maximum, 1.75 Typical
(@ 0 dB Attenuation)

 RF Power Ratings-Operating

+10 dBm CW Maximum
+20 dBm Typical

 RF Power Ratings-Survival

+30 dBm CW Maximum


8 Bit True Binary Logic

 Power Supply

+12 VDC @ 250 mA Maximum, 210 mA Typical
– 12 VDC @   50 mA Maximum,   30 mA


RF Input/Output: SMA Female
Power and Controls: 15 Pin Micro-D Subminiature
Mating Connector Furnished


2.00″ X 1.81″ X 0.50″


Available Options:


Extended Frequency Range: 10 MHz to 2 GHz


Extended Frequency Range: 50 MHz to 2 GHz


Two SMA Male RF Connectors


J1 SMA Male, J2 SMA Female


For Extended Frequency Range Units of
2-18 GHz, 2-19 GHz, 0.3-18 GHz, 0.2-18 GHz,
10 MHz-18 GHz Refer to AGT-2018-60DD-100 (Slim
Line) Data Sheet.  For Analog Voltage Controlled
Units With Solder Pins Refer to AGT-2018-60D-100
(Slim Line).


Mounting Surface Unpainted


±15 VDC Power Supply


0 to 30 dB Range


For High Speed Units of ≤1 usec and Extended Frequency
Ranges of 2-18 GHz,
2-19 GHz, 0.3-18 GHz, and 0.2-18 GHz
Refer to Data Sheets AGTN-2018-60DD-100 (Slim
Line).  For Analog Voltage Controlled Unit with
Solder Pins Refer to AGTN-2018-60D-100 (Slim Line)


Analog Controlled Unit-10 dB/Volt Pin 2 is Used As Control
(Other Control Voltages Available).  For Solder Pin
Units Refer to
AGTN-2000-60D-100 (Slim Line).


9 Bit True Binary Logic


10 Bit True Binary Logic


11 Bit True Binary Logic


12 Bit True Binary Logic


Blind Mate Connectors


Special Customer Specification

Environmental Ratings:

Our standard
environmental ratings are as follows, for specific
requirements please contact us…

 -55 ºC to +125
ºC Operating
ºC to +125 ºC Non-Operating
 Humidity:  MIL-STD-202F,
Method 103B Cond. B
 Shock:  MIL-STD-202F,
Method 213B Cond. B
 Vibration:  MIL-STD-202F,
Method 204D Cond. B
 Altitude:  MIL-STD-202F,
Method 105C Cond. B

 Temperature Cycle:
Method 107D Cond. A


Outline Drawing:

Click here to see the Outline Drawing for


Product Feature:

Click here to see the Product Feature for

Pin Numbering Chart for
Multipin Connector:

Click here to see our
Numbering Chart


Test Report:
Click here to see the Test Report for